Pak Exam MCQs PakExamMCQs provide MCQ'S for all subjects exam of PPSC, FPSC, CSS, MPT, ALL PUBLIC SERVICE COMMISSIONS, ALL SCREENING TESTS, ALL SINGLE PAPERS TEST, OTS, NTS, BTS, UTS, STS, JTS, CTS, MTSP, UNIVERSITY ENTRY TESTS & ALL OTHER ALLIED TESTS
A. Decimal Digit
B. Binary Digit
C. Octal Digit
D. Hexadecimal Digit
Answer & Solution
Option: B
Explanation :A bit (short for binary digit) is the smallest unit of data in a computer. A bit has a single binary value, either 0 or 1. Although computers usually provide instructions that can test and manipulate bits, they generally are designed to store data and execute instructions in bit multiples called bytes. In most computer systems, there are eight bits in a byte. The value of a bit is usually stored as either above or below a designated level of electrical charge in a single capacitor within a memory device.
Half a byte (four bits) is called a nibble. In some systems, the term octet is used for an eight-bit unit instead of byte. In many systems, four eight-bit bytes or octets form a 32-bit word. In such systems, instruction lengths are sometimes expressed as full-word (32 bits in length) or half-word (16 bits in length).
Explanation :A bit (short for binary digit) is the smallest unit of data in a computer. A bit has a single binary value, either 0 or 1. Although computers usually provide instructions that can test and manipulate bits, they generally are designed to store data and execute instructions in bit multiples called bytes. In most computer systems, there are eight bits in a byte. The value of a bit is usually stored as either above or below a designated level of electrical charge in a single capacitor within a memory device.
Half a byte (four bits) is called a nibble. In some systems, the term octet is used for an eight-bit unit instead of byte. In many systems, four eight-bit bytes or octets form a 32-bit word. In such systems, instruction lengths are sometimes expressed as full-word (32 bits in length) or half-word (16 bits in length).
Discuss in Forum
Report Error
Please comment below with correct answer and it’s detail explanation.
